Southwire 10-3 CU NM-B With Ground Pink Jkt 50 Ft

Construction

1. Conductor: Bare copper per ASTM B3. Sizes #14 AWG - #10 AWG are solid. Sizes #8 AWG - #2 AWG are Class B compressed stranded per ASTM B8
   
2. Insulation: All phases and neutral(s) are insulated with Polyvinyl Chloride (PVC) with Nylon Sheath
   Color Code:
   2/C: Black, White
   3/C: Black, Red, White
   4/C: Black, Red, Blue, White
   
3. Ground: Solid soft drawn bare copper with kraft paper wrap
   
4. Binder: Kraft paper
   
5. Jacket: Polyvinyl Chloride (PVC) jacket utilizing SIMpull® Technology

Standards & References

• ASTM B3 Soft or Annealed Copper Wire
  
• ASTM B8 Concentric-Lay-Stranded Copper Conductors
  
• UL 719 Nonmetallic-Sheathed Cables
  
• RoHS-2 (European Directive 2011/65/EU)
  
• Federal Specification A-A-59544
  
• NOM-063-SCFI Electrical Products – Conductors – Safety Requirements

Application & Features
Southwire Romex® Brand SIMpull® (nonmetallic-sheathed) Cable may be used for both exposed and concealed work in dry locations with ampacity limited to that for 60°C conductors as specified in the National Electrical Code® (NEC). Individual conductor insulation is rated 90°C as required by the NEC and by the UL product standard (UL 719) for terminations in lighting fixtures. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts. Individual conductors within Type NM-B Cable are not listed or marked as THHN conductors (or any other NEC recognized conductor type) and are not permitted to be installed apart from the complete Type NM-B Cable. Conductors routed inside panelboards and boxes (without the cable jacket) for termination therein are considered part of the complete Type NM-B Cable.